Stans No Tubes Rim Tape 9.14m Various Widths
Click & Collect Terms & Conditions
IMPORTANT INFORMATION. PLEASE READ BEFORE PLACING YOUR ORDER.
IF you choose our Click & Collect option please be aware that there are certain terms and conditions (T's&C's) that must be met when you collect your order.
A) IF PAYING BY CREDIT CARD
(T's&C's) are:
YOU MUST BRING THE FOLLOWING WHEN YOU COLLECT YOUR ORDER
- An electronic or print version of the order confirmation you receive after placing the order; AND
- The SAME credit card used to make the purchase; AND
- Your driver’s licence where the name and address MUST match your web order details
Please note that you will be UNABLE TO COLLECT YOUR ORDER WITHOUT THESE ITEMS. These conditions are to protect everyone from fraudulent activity.
B) IF PAYING BY ANY OTHER OPTION - Afterpay, Zippay etc
(T's&C's) are:
- The details of the person paying for the order MUST match the customer details entered for the web order. Eg. John Smith CANNOT pay for an order using Afterpay and then enter Mary Jones as the customer details for the order. If John Smith pays for the order, then John Smith must collect the order with ID as below.
- An electronic or print version of the order confirmation you receive after placing the order; AND
- Your driver’s licence where the name and address MUST match your web order details
Close
$39.99
$39.99
Couldn't load pickup availability
Stans No Tubes Rim Tape 9.14m x various widths
Features:
. Creates a durable, airtight seal over spoke holes
. Completely non-porous vapour barrier seals rim interior from moisture
. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue
. Low friction surface helps tyre beads slip into place
Recommended rim widths:
Stan's 21mm Rim Tape is recommended for rims with an internal width of 19-21mm.
Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm.
Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm.
Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm.
Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm.
Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm.
Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm.
Going tubeless is a no brainer in many bicycle riding situations. This has become easier with many manufacturers supplying bikes with tubeless ready rims and tyres. Not sure if your bike is ready for tubeless? Ask our experienced team at Wollongong Bike Hub and they can help you choose the best tubeless set up to suit your bike. You can perform the work yourself or book your bike into our workshop and allow our experienced mechanics to do this for you. Normal workshop charges apply.
Information from Stans that may be helpful
WHAT YOU NEED TO KNOW:
Stan's Yellow Tape is designed to work with tubeless-ready wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape over the spoke holes of your rim is all you need. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.
WHAT IF I HAVE AN OLDER RIM?
The BST (Bead Socket Technology) developed by Stan's NoTubes has largely become the "tubeless-ready" standard for all current bicycles, but many older, traditional, non-tubeless-ready bicycle rims are still in use on bicycles. Stan's Yellow Rim Tape is not, by itself, a tubeless conversion for these older, traditional non-tubeless-ready rims. These older rims require the use of a Stan's NoTubes Rim Strip (now discontinued) in order to achieve a secure tubeless setup. We strongly recommend considering a new tubeless-ready wheelset in place of a rim strip conversion, but Stan's Rim Strips and kits may still be available at your local bike shop, and can be used when converting vintage bikes with older, non-tubeless-ready rims. Using only Yellow Rim Tape and Stan's NoTubes sealant on a non-tubeless-ready rim can result in difficult inflation, and catastrophic "burping" issues. While Stan's Rim Strips have been discontinued, we continue to provide information and resources to assist in converting non-tubeless-ready wheels.
Features:
. Creates a durable, airtight seal over spoke holes
. Completely non-porous vapour barrier seals rim interior from moisture
. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue
. Low friction surface helps tyre beads slip into place
Recommended rim widths:
Stan's 21mm Rim Tape is recommended for rims with an internal width of 19-21mm.
Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm.
Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm.
Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm.
Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm.
Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm.
Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm.
Going tubeless is a no brainer in many bicycle riding situations. This has become easier with many manufacturers supplying bikes with tubeless ready rims and tyres. Not sure if your bike is ready for tubeless? Ask our experienced team at Wollongong Bike Hub and they can help you choose the best tubeless set up to suit your bike. You can perform the work yourself or book your bike into our workshop and allow our experienced mechanics to do this for you. Normal workshop charges apply.
Information from Stans that may be helpful
WHAT YOU NEED TO KNOW:
Stan's Yellow Tape is designed to work with tubeless-ready wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape over the spoke holes of your rim is all you need. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.
WHAT IF I HAVE AN OLDER RIM?
The BST (Bead Socket Technology) developed by Stan's NoTubes has largely become the "tubeless-ready" standard for all current bicycles, but many older, traditional, non-tubeless-ready bicycle rims are still in use on bicycles. Stan's Yellow Rim Tape is not, by itself, a tubeless conversion for these older, traditional non-tubeless-ready rims. These older rims require the use of a Stan's NoTubes Rim Strip (now discontinued) in order to achieve a secure tubeless setup. We strongly recommend considering a new tubeless-ready wheelset in place of a rim strip conversion, but Stan's Rim Strips and kits may still be available at your local bike shop, and can be used when converting vintage bikes with older, non-tubeless-ready rims. Using only Yellow Rim Tape and Stan's NoTubes sealant on a non-tubeless-ready rim can result in difficult inflation, and catastrophic "burping" issues. While Stan's Rim Strips have been discontinued, we continue to provide information and resources to assist in converting non-tubeless-ready wheels.